Studio 2011 - termbase message - no results avaiable Thread poster: Daniel Weston
|
|---|
Daniel Weston 
United States
Local time: 10:41
French to English
+ ...
Terms are recognized and indicated with a red line over them in the source column and I know they exist in the termbase, however, there's a message in the termbase box on the right saying "no results available" - does anyone know what could cause this?
| | | | Juha Uusikartano
Finland
Local time: 20:41
Member (2013)
English to Finnish
+ ...
| Same issue here | Jul 15, 2013 |
I have similar situation with my Studio 2011, red hashlines show in the source, but no results in the termbase window, and cannot get any search results with it. In my case the termbase in question came with a Studio package from a client.
I have been googling about this, but can only find some references to Multiterm issues when used with Trados 2007 and then Studio 2009.
Another unrelated result to above says there is some issue with Studio 2011 & Java that causes te... See more I have similar situation with my Studio 2011, red hashlines show in the source, but no results in the termbase window, and cannot get any search results with it. In my case the termbase in question came with a Studio package from a client.
I have been googling about this, but can only find some references to Multiterm issues when used with Trados 2007 and then Studio 2009.
Another unrelated result to above says there is some issue with Studio 2011 & Java that causes termbases not to work, but haven't been able to dig any deeper than that. So any help would be appreciated.
Daniel Weston wrote:
Terms are recognized and indicated with a red line over them in the source column and I know they exist in the termbase, however, there's a message in the termbase box on the right saying "no results available" - does anyone know what could cause this?
▲ Collapse
| | | | Juha Uusikartano
Finland
Local time: 20:41
Member (2013)
English to Finnish
+ ...
Ok, I have been able to solve my issue, I think. At least Termbase is working now.
Firstly, when I updated to Studio SP2, I apparently didn't update to Multiterm SP2, so I installed this. However, when I lauch the separate Multiterm Desktop, I immediately get a 'program stopped working' error. With a bit of googling, I Find this solut... See more Ok, I have been able to solve my issue, I think. At least Termbase is working now.
Firstly, when I updated to Studio SP2, I apparently didn't update to Multiterm SP2, so I installed this. However, when I lauch the separate Multiterm Desktop, I immediately get a 'program stopped working' error. With a bit of googling, I Find this solution: http://kb.sdl.com/kb/?ArticleId=3884&source=article&c=12&cid=23#tab:homeTab:crumb:7:artId:3884
What this is saying, essentially, is that Canon Printer software makes some inccorect registry records which mess up Multiterm. So the solution is to remove the registry items as per the instructions. I did so, and then re-installed Multiterm SP2.
But I still get no response from termbase in Studio 2011. So now I change Java security settings from Control Panel -> Programs -> Java -> Security. Just move the slider to medium level (lowest), click apply and close the window. Launch Studio, and Now Termbase works alright!
Of course, it might be a major issue that you need to drop that security setting in Java? So if you don't have Canon printer software installed, and your Multiterm works alright, then try out the Java setting. I hope more knowledgeable people will comment about Java security - is lowering the security level bad idea? ▲ Collapse
| | | | Daniel Weston
United States
Local time: 10:41
French to English
+ ...
TOPIC STARTER | I have Multiterm SP2 installed... | Jul 16, 2013 |
Thanks for the suggestion, but I already have SP2 installed!
| | |
|
|
|
Juha Uusikartano
Finland
Local time: 20:41
Member (2013)
English to Finnish
+ ...
| How about Java? | Jul 16, 2013 |
Ok Daniel, but did you try to set Java security at a lower level, and then try out termbase functionality in Studio?
| | | | silence_deng
China
Local time: 02:41
Chinese to English
+ ...
| hi, Daniel, have u solved ur problem? | Nov 25, 2013 |
I met the same problem last night, and I solved it by resetting my widow layout.
Please click in the menu bar on View > Reset Window Layout
you can also consult the following link:
http://kb.sdl.com/kb/?ArticleId=4451#tab:homeTab:crumb:7:artId:4451
Hope it will help....
Daniel Weston wrote:
Terms are recognized and indicated with a red line over them in the source column and I know they exist in the termbase, however, there's a message in the termbase box on the right saying "no results available" - does anyone know what could cause this?
[Edited at 2013-11-25 04:04 GMT]
[Edited at 2013-11-25 04:07 GMT]
| | | |
Thanks, silence_deng! Your solution worked for me.
All the best,
Ana
| | | | Jacques DP
Switzerland
Local time: 19:41
English to French
| Same problem, same solution | Feb 18, 2015 |
Reset Window LAyout did the trick for me as well.
That means by the way that the bug is still present in Studio 2014 SP2 which I am using.
| | | | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » Studio 2011 - termbase message - no results avaiable | Trados Studio 2022 Freelance | The leading translation software used by over 270,000 translators.
Designed with your feedback in mind, Trados Studio 2022 delivers an unrivalled, powerful desktop
and cloud solution, empowering you to work in the most efficient and cost-effective way.
More info » |
| | Wordfast Pro | Translation Memory Software for Any Platform
Exclusive discount for ProZ.com users!
Save over 13% when purchasing Wordfast Pro through ProZ.com. Wordfast is the world's #1 provider of platform-independent Translation Memory software. Consistently ranked the most user-friendly and highest value
Buy now! » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
Translation news related to SDL Trados
